钢轨打磨技术发展现状及打磨策略探讨

龚继军; 郭猛刚; 侯博; 王军平; 蒋俊

doi:10.13890/j.issn.1000-128x.2020.03.005

您当前的位置：

首页 >

文章列表页 >

钢轨打磨技术发展现状及打磨策略探讨

综述与评论 | 更新时间：2021-12-10

- 钢轨打磨技术发展现状及打磨策略探讨
- Discussion on Rail Grinding Technology Development Situation and Grind Strategies
- 机车电传动 2020年第3期页码：23-29,34
- 作者机构：
  
  1.中铁物总运维科技有限公司，四川　成都　610031
  2.北京铁福轨道维护技术有限公司，北京　100036
  3.中车青岛四方车辆研究所有限公司　钩缓事业部，山东　青岛　266031
- 作者简介：
  
  龚继军（1991—），男，硕士，工程师，主要从事钢轨打磨、轮轨关系研究工作。
- 基金信息：
- DOI：10.13890/j.issn.1000-128x.2020.03.005
  中图分类号：
扫描看全文
龚继军, 郭猛刚, 侯博, 等. 钢轨打磨技术发展现状及打磨策略探讨[J]. 机车电传动, 2020,(3):23-29,34.

Jijun GONG, Menggang GUO, Bo HOU, et al. Discussion on Rail Grinding Technology Development Situation and Grind Strategies[J]. Electric Drive for Locomotives, 2020,(3):23-29,34.
龚继军, 郭猛刚, 侯博, 等. 钢轨打磨技术发展现状及打磨策略探讨[J]. 机车电传动, 2020,(3):23-29,34. DOI： 10.13890/j.issn.1000-128x.2020.03.005.

Jijun GONG, Menggang GUO, Bo HOU, et al. Discussion on Rail Grinding Technology Development Situation and Grind Strategies[J]. Electric Drive for Locomotives, 2020,(3):23-29,34. DOI： 10.13890/j.issn.1000-128x.2020.03.005.

摘要

综述了钢轨打磨技术国内外起源以及发展现状，对现阶段钢轨打磨技术的分类进行了介绍，重点介绍了曲线和直线钢轨的打磨策略制定原则；对钢轨廓形设计的主要原则进行了归纳总结；分析研究了打磨作业中打磨量的主要影响因素；提出了钢轨打磨应根据打磨前实际钢轨使用状态，在满足目标廓形、保证打磨深度和消除病害的前提下，使打磨切削量最小；最后对今后钢轨打磨技术研究重点进行了展望。

Abstract

The origin and development status of rail grinding technology at home and abroad was summarized, and the classification of rail grinding technology at current stage was introduced, focusing on the principles of making grinding strategy for curve and straight rail. The main principles of rail profile design were summarized. The main influencing factors of grinding amount in grinding operation were analyzed and studied. It was put forward that rail grinding should be based on rail actual use state, and minimize the grinding cutting amount under the premise of meeting the target profile, ensuring the grinding depth and eliminating the defects. Finally, the research focus of rail grinding technology in the future was prospected.

关键词

钢轨打磨打磨策略关键技术打磨量打磨技术钢轨

Keywords

rail grindinggrinding strategykey technologygrinding amountrail grinding technologyrail

references

任尊松. 车辆系统动力学[M]. 北京: 中国铁道出版社, 2019.

金雪松, 刘启跃. 轮轨摩擦学[M]. 北京: 中国铁道出版社, 2004.

雷晓燕. 钢轨打磨原理及其应用[J]. 铁道工程学报, 2000, 65(1): 28-33.

周坤, 王文健, 刘启跃, 等. 钢轨打磨机理研究进展及展望[J]. 中国机械工程, 2019, 30(3): 284-294.

FRANKLIN F J, WEEDAB G J, KAPOOR A, et al. Rolling contact fatigue and wear behavior of the infrastar tow-material rail[J]. Wear, 2005, 258(7/8): 1048-1054.

ZHOU K, DING H H, ZHANG S Y, et al. Modelling and simulation of the grinding force in rail grinding that considers the swing angle of the grinding stone[J]. Tribology International, 2019, 137(11): 274-288

ISHIDA M, AKAMA M, KASGIWAYA K, et al. The current status theory and practice on rail integrity in Japanese railways—Rolling contact fatigue and corrugations[J]. Fatigue and Fracture of Engineering Materials and Structures, 2003, 26(10): 909-919.

刘明月, 李建勇, 蔡永林, 等. 钢轨打磨技术现状和发展趋势[J]. 中国铁道科学, 2014, 35(4): 29-37.

MARICH S. Rail grinding strategies adopted in Australia[J]. Rail Engineering International, 2005, 34(1): 4-6.

ZAREMBSKI A M. Grinding as part of rail management strategy[J]. Railway Track and Structures, 2008, 104(6): 55-58.

刘真. 钢轨磨耗打磨关键技术研究[D]. 南京: 南京理工大学,2017.

浏览量

下载量

CSCD

CNKI被引量

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于高速列车异常晃动的钢轨廓形打磨管理

山地齿轨铁路的发展及关键技术研究

基于轻量级卷积神经网络的地铁轨道线路状态检测系统

多柔性因素下轮轨接触动态行为特性的研究

钢轨打磨控制策略研究