1.西南交通大学 牵引动力国家重点实验室,四川 成都 610031
郭兆团(1990—),男,硕士研究生,研究方向为轨道车辆系统动力学。
扫 描 看 全 文
郭兆团, 池茂儒, 徐腾养. 实测车轮踏面对动力学的影响研究[J]. 机车电传动, 2019,(2):41-43.
Zhaotuan GUO, Maoru CHI, Tengyang XU. Influence of Measured Wheel Tread on Dynamics[J]. Electric Drive for Locomotives, 2019,(2):41-43.
郭兆团, 池茂儒, 徐腾养. 实测车轮踏面对动力学的影响研究[J]. 机车电传动, 2019,(2):41-43. DOI: 10.13890/j.issn.1000-128x.2019.02.008.
Zhaotuan GUO, Maoru CHI, Tengyang XU. Influence of Measured Wheel Tread on Dynamics[J]. Electric Drive for Locomotives, 2019,(2):41-43. DOI: 10.13890/j.issn.1000-128x.2019.02.008.
利用SIMPACK动力学仿真软件建立我国某现役高速动车组的动力学模型。对服役5万km,10万km,15万km和20万km的线路实测车轮踏面对动力学影响并进行分析。分析结果表明:随着车轮踏面服役里程的增加,车辆系统的临界速度先增加后减小再增加后趋于平缓;随车轮踏面服役里程的增加垂向平稳性指标变化不大,横向平稳性除服役10万km外均随服役里程的增加而增加;车轮踏面服役里程对脱轨系数、轮轴横向力、磨耗功率有较大影响,对轮重减载率影响不是很明显。
By using computational multi-body dynamics simulation software SIMPACK, a dynamics simulation model of high-speed EMUs running in China was built. The actual measurement wheel tread which had serviced 50 000 km, 100 000 km, 150 000 km and 200 000 km effect on dynamic was analyzed. The analysis results showed that the critical velocity of the vehicle system increased with the increase of the service range, and then decreased with the increase of the service range, then increased with the increase of the service range and leveling off finally. With the increase of the wheel tread service mileage vertical stability index had not changed steadily, and the horizontal stability had been increased with the increase of the service mileage besides serving 100 000 kilometers. Derailment coefficient, lateral wheelset force and abrasion power larger changed with the increase of the wheel tread service range, and the weight loss rate changed a little with the increase of the wheel tread service range.
动车组车轮踏面动力学服役里程仿真
EMUswheel treaddynamicsservice rangesimulation
陈康, 罗赟, 金鼎昌. 2B0架悬式动力车运行平稳性和蛇行稳定性[J]. 西南交通大学学报, 2003, 38(1): 28-33.
朴明伟, 樊令举, 梁树林, 等. 基于轮轨匹配的车辆横向稳定性分析[J]. 机械工程学报, 2008, 44(3): 22-28.
黄成荣, 臧其吉, 王卫东. 高速万向轴传动式动力车动力学性能分析[J]. 中国铁道科学, 1997, 18(4): 25-32.
罗赟, 金鼎昌. 高速动力车轮轨几何参数设计[J]. 铁道学报, 1994, 16(增刊1): 24-30.
刘新明. 机车车辆弧形踏面外形研制[J]. 铁道车辆, 2000, 38(2): 24-28.
王开云, 翟婉明, 蔡成标. 两种类型踏面的车辆与轨道耦合动力学性能比较[J]. 西南交通大学学报, 2002, 37(3): 260-264.
王成国, 王永菲. 高速轮轨接触几何关系的比较分析[J]. 铁道机车车辆, 2006, 26(4): 1-5.
孙善超, 王成国, 李海涛, 等. 轮/轨接触几何参数对高速客车动力学性能的影响[J]. 中国铁道科学, 2006, 27(5): 93-98.
沈钢, 顾江. 低地板车辆的踏面外形设计及动力学仿真[J]. 同济大学学报(自然科学版), 2003, 31(10): 1206-1211.
KALKER J J. Simulation of the development of a railway wheel profile through wear[J]. Wear, 1991, 150(1): 355-365.
陈华斌, 金鼎昌, 古滨. 高速万向轴式动力车转向架的参数研究[J]. 西南交通大学学报, 1998, 33(2): 158-163.
张剑, 孙丽萍. 车轮型面动态高速曲线通过性比较[J]. 交通运输工程学报, 2007, 7(6): 6-11.
陈泽深, 王成国. 铁道车辆动力学与控制[M]. 北京: 中国铁道出版社, 2004.
0
浏览量
2
下载量
0
CSCD
0
CNKI被引量
关联资源
相关文章
相关作者
相关机构