抗侧滚扭杆轴滚压强化表层残余应力的研究

邹敏佳; 刘文松; 郭春杰; 聂清明; 罗斌

doi:10.13890/j.issn.1000-128x.2012.06.023

您当前的位置：

首页 >

文章列表页 >

抗侧滚扭杆轴滚压强化表层残余应力的研究

研究开发 | 更新时间：2021-12-13

- 抗侧滚扭杆轴滚压强化表层残余应力的研究
- Research of Surface Residual Stress Strengthening with Rolling for Anti-roll Torsion Bar
- 机车电传动 2012年第6期页码：37-39
- 作者机构：
  
  1. 株洲时代新材料科技股份有限公司
- 作者简介：
- 基金信息：
- DOI：10.13890/j.issn.1000-128x.2012.06.023
  中图分类号：
扫描看全文
邹敏佳, 刘文松, 郭春杰, 等. 抗侧滚扭杆轴滚压强化表层残余应力的研究[J]. 机车电传动, 2012,(6):37-39.

ZOU Min-jia, LIU Wen-song, GUO Chun-jie, et al. Research of Surface Residual Stress Strengthening with Rolling for Anti-roll Torsion Bar[J]. Electric Drive for Locomotives, 2012,(6):37-39.
邹敏佳, 刘文松, 郭春杰, 等. 抗侧滚扭杆轴滚压强化表层残余应力的研究[J]. 机车电传动, 2012,(6):37-39. DOI： 10.13890/j.issn.1000-128x.2012.06.023.

ZOU Min-jia, LIU Wen-song, GUO Chun-jie, et al. Research of Surface Residual Stress Strengthening with Rolling for Anti-roll Torsion Bar[J]. Electric Drive for Locomotives, 2012,(6):37-39. DOI： 10.13890/j.issn.1000-128x.2012.06.023.

摘要

采取X 射线衍射法定量测定一种高速车用扭杆轴滚压后残余应力场。结果表明：该方法测得的数据准确，离散度小, 完全满足EN 15049中对残余应力的检测要求；随着滚压进刀量的增大，扭杆表层残余压应力逐渐变大，进刀量和残余应力呈指数关系分布，进刀量进一步增大，应力增大趋势变得平缓。

Abstract

Residual stress field of torsion bar after rolling was quantitatively measured with X-ray diffraction method. Test results showed that the measured method had accuracy data, small divergence factor, which could fulfill the requirement of residual stress in EN15049. Along with increase of rolling amount of feed, surface residual stress of torsion bar became bigger gradually, which was index distribution, and along with the further increase of amount of feed, increase trend of stress receded .

关键词

残余应力疲劳强度X 射线衍射法滚压抗侧滚扭轴

Keywords

residual stressfatigue strengthX-ray diffraction methodrollinganti-roll torsion bar

references

浏览量

下载量

CSCD

CNKI被引量

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于线路测试结果的转向架构架牵引电机振动试验载荷谱研究

基于UIC和JIS标准的焊接构架疲劳强度对比分析研究

空气弹簧气室载荷对焊接构架疲劳强度影响

气动载荷对高速动车组的设备舱强度影响研究

100%低地板有轨电车动力转向架构架强度分析