6英寸IGCT器件紧固力的适应性研究

曹强; 陈芳林; 陈勇民; 刘雅岚; 孙永伟

doi:10.13890/j.issn.1000-128X.2023.05.007

您当前的位置：

首页 >

文章列表页 >

6英寸IGCT器件紧固力的适应性研究

芯片技术 | 更新时间：2023-10-12

- 6英寸IGCT器件紧固力的适应性研究
- Research on adaptability of fastening force for 6-inch IGCTs
- 机车电传动 2023年第5期页码：71-77
- 作者机构：
  
  1.株洲中车时代半导体有限公司，湖南株洲 412001
- 作者简介：
  
  曹　强（1997—），男，硕士，主要从事IGCT器件与工艺设计研究；E-mail: caoqiang@csrzic.com
- 基金信息：
  
  国家重点研发计划项目(2021YFB2401604)
- DOI：10.13890/j.issn.1000-128X.2023.05.007
  中图分类号：
扫描看全文
曹强, 陈芳林, 陈勇民, 等. 6英寸IGCT器件紧固力的适应性研究[J]. 机车电传动, 2023,(5):71-77.

CAO Qiang, CHEN Fanglin, CHEN Yongmin, et al. Research on adaptability of fastening force for 6-inch IGCTs[J]. Electric Drive for Locomotives, 2023,(5):71-77.
曹强, 陈芳林, 陈勇民, 等. 6英寸IGCT器件紧固力的适应性研究[J]. 机车电传动, 2023,(5):71-77. DOI： 10.13890/j.issn.1000-128X.2023.05.007.

CAO Qiang, CHEN Fanglin, CHEN Yongmin, et al. Research on adaptability of fastening force for 6-inch IGCTs[J]. Electric Drive for Locomotives, 2023,(5):71-77. DOI： 10.13890/j.issn.1000-128X.2023.05.007.

摘要

IGCT作为一种高功率等级的全控型压接器件，随着器件直径扩大及应用串压级数增加，紧固力的设计至关重要。文章以6英寸6 000 A/4 500 V逆阻型IGCT器件为例，分析紧固力不均造成的器件性能影响，并优化IGCT阴极梳条局部跨距和采用边缘门极结构设计。试验结果表明，优化设计的器件在额定紧固力范围内不再出现门阴极性能异常，且紧固力适应性提升20%以上。

Abstract

As a high-power fully controlled press-pack device, IGCT's design of fastening force is crucial for its characteristics with the expansion of device diameter and the increase of cascade devices. Taking the 6-inch 6 000 A/4 500 V reverse blocking IGCT as an example, the influence of the fastening force on the device performance was analyzed, the design of local space between IGCT cathode comb bar was optimized and the edge gate design for IGCT chips was adopted. The experiment results show that the optimized device no longer has abnormal gate cathode performance within the rated fastening force range, and the adaptability of the fastening force is improved by more than 20%.

关键词

IGCT紧固力阴极梳条中间门极边缘门极

Keywords

IGCTfastening forcecathode fingermiddle gate edge gate

references

张明, 陈芳林, 李继鲁, 等. 国内IGCT器件的新进展[J]. 大功率变流技术, 2008(6): 1-5.

ZHANG Ming, CHEN Fanglin, LI Jilu, et al. Recent progress of domestic IGCT device[J]. High power converter technology, 2008(6): 1-5.

陈政宇, 余占清, 吕纲, 等. 基于IGCT串联的10 kV直流混合断路器研究[J]. 中国电机工程学报, 2016, 36(2): 317-326.

CHEN Zhengyu, YU Zhanqing, LYU Gang, et al. Researches on 10 kV DC hybrid circuit breaker based on IGCT series[J]. Proceedings of the CSEE, 2016, 36(2): 317-326.

STEIMER P K, GRUNING H E, WERNINGER J, et al. IGCT-a new emerging technology for high power, low cost inverters[J]. IEEE industry applications magazine, 1999, 5(4): 12-18.

STIASNY T, KAPPATOS V, SETZ T, 等. IGCT——更高功率处理能力的正确选择[J]. 大功率变流技术, 2015(6): 1-7.

STIASNY T, KAPPATOS V, SETZ T, et al. Where higher power handling capability is required-IGCT is the right choice[J]. High power converter technology, 2015(6): 1-7.

张明. 目前我国兆瓦级新型电力半导体器件[J]. 大功率变流技术, 2012(1): 1-8.

ZHANG Ming. Current novel power semiconductor devices with megawatts level of China[J]. High power converter technology, 2012(1): 1-8.

蔡维, 王诗祺, 李雪飞, 等. 集成门极换流晶体管 (IGCT) 机械压装研究[J]. 电工文摘, 2014(6): 18-20.

CAI Wei, WANG Shiqi, LI Xuefei, et al. Research on press for IGCT[J]. Electrician abstracts, 2014(6): 18-20.

曾文彬, 颜骥, 任亚东, 等. IGCT晶片的封装结构设计[J]. 大功率变流技术, 2015(6): 20-24.

ZENG Wenbin, YAN Ji, REN Yadong, et al. Package structure design of IGCT wafer[J]. High power converter technology, 2015(6): 20-24.

孙保涛, 李彦涌. 一种新型的平板型功率半导体器件压装技术[J]. 大功率变流技术, 2013(4): 1-3.

SUN Baotao, LI Yanyong. A new method of press mounting for press-pack power semiconductor[J]. High power converter technology, 2013(4): 1-3.

高原, 陈洁莲, 王才孝, 等. 大功率半导体组件压装技术研究[J]. 科技创新与应用, 2023, 13(1): 55-59.

GAO Yuan, CHEN Jielian, WANG Caixiao, et al. Research on the press technology for high power semiconductor assembles[J]. Technology innovation and application, 2023, 13(1): 55-59.

秦贤满. 热阻的概念和测试方法[J]. 半导体技术, 1996(3): 32-36.

QIN Xianman. The concept and testing method of thermal resistance[J]. Semiconductor technology, 1996(3): 32-36.

DENG Erping, ZHANG Jingwei, ZHAO Zhibin, et al. Influence of the clamping force on the power cycling lifetime reliability of press pack IGBT sub-module[J]. The journal of engineering, 2019, 2019(16): 2435-2439.

KIRIHATA H, TAKAHASHI Y, WAKIMOTO H, et al. Investigation of flat-pack IGBT reliability[C]//IEEE. Conference Record of 1998 IEEE Industry Applications Conference and the Thirty-Third IAS Annual Meeting. St. Louis: IEEE, 1998: 1016-1021.

浏览量

下载量

CSCD

CNKI被引量

文章被引用时，请邮件提醒。

提交

工具集

关联资源

暂无数据