Peng YUE, Sen MA, Guofang LI, et al. Research on Dynamic Performance of Wheel-Rail Contact Under Multiple Flexible Factors. [J]. Electric Drive for Locomotives (4):34-41(2021)
DOI:
Peng YUE, Sen MA, Guofang LI, et al. Research on Dynamic Performance of Wheel-Rail Contact Under Multiple Flexible Factors. [J]. Electric Drive for Locomotives (4):34-41(2021) DOI: 10.13890/j.issn.1000-128x.2021.04.006.
Research on Dynamic Performance of Wheel-Rail Contact Under Multiple Flexible Factors
In order to improve the calculation accuracy of the vibration response of vehicle system, based on the rigid flexible coupling dynamics theory, the wheelset, frame and track were considered as flexible bodies, and the vehicle track coupling dynamics model considering multiple flexible bodies was established. The vibration characteristics of the dynamic interaction between wheel and rail were compared and analyzed, and the dynamic performance of wheel-rail contact and smooth-running performance under multiple flexible factors were studied. The results show that the vibration acceleration of the wheel varies greatly in the vertical direction and the transverse motion of the flexible parts is "misplaced" under the condition of multi-flexibility. The dynamic parameters are also changed. The acceleration of the car body increases by 36.7% in the vertical direction, while it has a certain relation with the line radius in the transverse direction. The transverse Sperling index decreases by 9.5%, while the vertical Sperling index increases by 16.6% under the multi-flexibility factors.
CHEN Xinhua, HUANG Zhihui, BU Jiling. Dynamic simulation analysis of flexible wheelset based on ANSYS and SIMPACK[J]. Electric Drive for Locomotives, 2014(2): 41-45.
WU Dan, DING Wangcai, GUO Fuqiang, et al. Effects of harmonic wear of wheels on creep characteristics of a wheel-rail system[J]. Journal of Vibration and Shock, 2021, 40(4): 1-9.
XIAO Qian, GAO Xueshan, CHANG Chao. Influence of rail grinding on wheel-rail profile matching and track vibration response characteristics[J]. Journal of the China Railway Society, 2021, 43(2): 125-133.
ZHONG Shuoqiao, XIONG Jiayang, XIAO Xinbiao, et al. Effect of the first two wheelset bending modes on wheel-rail contact behavior[M]//FANG Youtong, ZHANG Yuehong. China's high-speed rail technology. Hangzhou: Zhejiang University Press, 2018: 341-371.
LI Guofang, YUE Peng, DING Wangcai, et al. Research on the influence of flexibility wheelset on vehicle dynamic curve passing performance[J]. Railway Standard Design, 2019, 63(9): 173-179.
CUI Xiaolu, HE Zhiqiang, HUANG Bo, et al. Study on the effects of wheel-rail friction self-excited vibration and feedback vibration of corrugated irregularity on rail corrugation[J]. Wear, 2021(477). DOI: 10.1016/j.wear.2021.203854http://doi.org/10.1016/j.wear.2021.203854.
CIOTLAUS M, KOLLO G, MARUSCEAC V, et al. Rail-wheel interaction and its influence on rail and wheels wear[J]. Procedia Manufacturing, 2019(32): 895-900. DOI: 10.1016/j.promfg.2019.02.300http://doi.org/10.1016/j.promfg.2019.02.300.
YU Miao, WANG Weidong, LIU Jinchao. High frequency dynamic characteristics of high-speed wheel-rail transient rolling contact in rail corrugation section[J]. China Railway Science, 2018, 39(5): 58-66.
Chinas Ministry of Railway, division of construction management. Interim provisions on design of new built passenger dedicated railway line with speed of 200-250 km: TJS〔2005〕No.140[S]. Beijing: China Railway Publishing House, 2005.
Chinas Ministry of Railway, division of construction management. Interim provisions on design of new 200 km speed passenger freight mixed line: TJH〔2005〕No.285[S]. Beijing: China Railway Publishing House, 2005.