Guanglin YAN, Yongjian ZHI, Xiang CHEN, et al. Research on Mechanism and Suppression Technique of Metro Vehicles Traction Motor Bearing Electrocorrosion. [J]. Electric Drive for Locomotives (4):102-106(2019)
DOI:
Guanglin YAN, Yongjian ZHI, Xiang CHEN, et al. Research on Mechanism and Suppression Technique of Metro Vehicles Traction Motor Bearing Electrocorrosion. [J]. Electric Drive for Locomotives (4):102-106(2019) DOI: 10.13890/j.issn.1000-128x.2019.04.113.
Research on Mechanism and Suppression Technique of Metro Vehicles Traction Motor Bearing Electrocorrosion
In order to solve the problem of electrocorrosion of traction motor bearings of metro vehicles, the fault mechanism was analyzed, and the solutions were put forward and verified. Firstly, it was pointed out that high bearing voltage was the direct cause of electrocorrosion; secondly, based on the characteristics of metro traction system, the high frequency equivalent circuit of bearing electrocorrosion was established, and the formation of bearing voltage and some influencing factors were analyzed theoretically and experimentally; finally, according to the analysis results, the effectiveness of three bearing voltage suppression measures was verified.The results showed that changing EMI capacitance of traction system had no significant effect on restraining bearing voltage, but reducing the value of high frequency inductance of grounding circuit and installing grounding ring could restrain bearing voltage effectively. In addition, the possible risk of installing grounding ring was discussed, and the risk assessment method was provided.
关键词
地铁车辆轴承电压共模电压电腐蚀仿真
Keywords
metro vehiclesbearings voltagecommon-mode voltageelectrocorrosionsimulation
references
姜艳姝. 现代变频调速系统负面效应研究及其对策[D]. 哈尔滨: 哈尔滨理工大学, 2008.
行震. 变频器负面效应分析与滤波器设计[D]. 大连: 大连理工大学, 2008.
MAGDUN O, BINDER A. High-frequency induction machine modeling for common mode current and bearing voltage calculation[J]. IEEE Transactions on Industry Applications, 2014, 50(3): 1780-1790.
MUETZE A, BINDER A. Calculation of motor capacitances for prediction of the voltage across the bearings in machines of inverter-based drive systems[J]. IEEE Transactions on Industry Applications, 2007, 43(3): 665-672.
MUETZE A, TAMMINEN J, AHOLA J. Influence of motor operating parameters on discharge bearing current activity[J]. IEEE Transactions on Industry Applications, 2011, 47(4): 1767-1777.
MUETZE A, BINDER A. Calculation of circulating bearing currents in machines of inverter-based drive systems[J]. IEEE Transactions on Industrial Electronics, 2007, 54(2): 932-938.
MUETZE A, WILLIAM OH H. Application of static charge dissipation to mitigate electric discharge bearing currents[J]. IEEE Transactions on Industry Applications, 2008, 44(1): 135-143.