Design and Finite Element Analysis of New Superconducting Maglev Bogie

Wu CHEN; Bin DENG; Zigang DENG; Wenbiao HUO; Zhihui YIN

doi:10.13890/j.issn.1000-128x.2019.01.111

您当前的位置：

首页 >

文章列表页 >

Design and Finite Element Analysis of New Superconducting Maglev Bogie

更新时间：2021-12-13

- Design and Finite Element Analysis of New Superconducting Maglev Bogie
- Electric Drive for Locomotives Issue 1, Pages: 56-60(2019)
- 作者机构：
  
  1.西南交通大学　机械工程学院，四川　成都　610031
  2.西南交通大学　牵引动力国家重点实验室，四川　成都　610031
  3.中车唐山机车车辆有限公司，河北　唐山　063035
- 作者简介：
- 基金信息：
- DOI：10.13890/j.issn.1000-128x.2019.01.111
  CLC：
扫描看全文
Wu CHEN, Bin DENG, Zigang DENG, et al. Design and Finite Element Analysis of New Superconducting Maglev Bogie. [J]. Electric Drive for Locomotives (1):56-60(2019)
DOI：

Wu CHEN, Bin DENG, Zigang DENG, et al. Design and Finite Element Analysis of New Superconducting Maglev Bogie. [J]. Electric Drive for Locomotives (1):56-60(2019) DOI： 10.13890/j.issn.1000-128x.2019.01.111.

摘要

针对磁悬浮列车转向架进行有限元分析时悬浮面的边界条件设置为全约束，但表现出的工况与实际工况不符的问题，提出一种以弹性支撑为边界约束条件，以列车轻量化为目标的设计分析方法。通过SolidWorks软件进行了新型高温超导磁悬浮转向架模型的设计，并根据磁悬浮列车不同的运行工况，分析了转向架整体强度以及杜瓦横梁与磁轨之间的最小间距。结果表明，此转向架满足设计要求，为后续优化计算提供了分析依据。

Abstract

Aiming at inconsistent problem with the actual working condition when the boundary condition of the suspended surface was set to the whole constraint in the finite element analysis of the maglev train bogie, a new method with the boundary constraint of elastic support and on the purpose of lightweight train was brought out. A new magnetic levitation bogie of high temperature superconducting was designed by SolidWorks software, and according to the different operating conditions of the maglev train, the overall strength of the bogie and the minimum spacing between the Dewar beam and the track were analyzed. The results showed that the bogie met the design requirements and provided the basis for the subsequent optimization calculation.

关键词

磁悬转向架磁悬浮列车杜瓦横梁弹性支撑有限元分析

Keywords

maglev bogiemaglev trainDewar beamelastic supportfinite element analysis

references

白雪, 赵立峰, 蒋靖, 等. 超导磁悬浮转向架设计[J]. 液压气动与密封, 2011, 31(8): 13-15.

任治军, 赵志苏. 中低速磁浮列车转向架的结构动力学分析[J]. 机械工程师, 2005, 37(8): 31-33.

杨磊, 赵志苏. 磁悬浮列车转向架结构强度的有限元分析[J]. 机械, 2004, 43(2): 13-15.

张卫华, 刘刚. 动车组总体与转向架[M]. 北京: 中国铁道出版社, 2011.

仉毅, 周虹. 采用HALBACH磁阵列的磁悬浮平台的磁场分析[J]. 机床与液压, 2010, 38(1): 41-43.

DENG Zigang, ZHANG Weihua, ZHENG Jun, et al. A hightemperature superconducting maglev ring test line developed in Chengdu, China[J]. IEEE Transactions on applied superconductivity, 2016, 26(6): 1-8.

余华俐, 徐创文. 基于Pro/E和ANSYS的钻机大钩强度有限元分析[J]. 制造业自动化, 2009, 31(10): 119-121.

客车转向架结构强度试验方法：UIC 515-4—1993[S].

周益, 刘放, 李飞, 等. 运用SolidWorks和ANSYS的磁浮列车悬浮架结构有限元分析[J]. 现代制造工程, 2012, 35(8): 17-20.

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design of car body structure for articulated EMUs

Analysis of AC winding loss of permanent magnet synchronous traction motor with high power

Effect of onboard superconducting magnet length on the levitation characteristics of electrodynamic levitation train

Influence of eddy current braking of high-speed train on track axle counter

Simulation Analysis of High Voltage Electrical Box Electric Field for Centralized Power EMUs

Related Author

No data

Related Institution

CRRC Zhuzhou Locomotive Co., Ltd.

State Key Laboratory of System Integration for High-power AC Drive Electric Locomotive

CRRC Yongji Electric Co., Ltd.

State Key Laboratory of Traction Power, Southwest Jiaotong University

CRRC Nanjing Puzhen Haitai Brake Equipments Co., Ltd.

⁰