Automatic Test Research of LabVIEW Program on Network Control Platform Software Serial Communication

LIU Zhonghua; LI Wenbo; CHEN Bo

doi:10.13890/j.issn.1000-128x.2017.04.107

您当前的位置：

首页 >

文章列表页 >

Automatic Test Research of LabVIEW Program on Network Control Platform Software Serial Communication

更新时间：2021-12-13

- Automatic Test Research of LabVIEW Program on Network Control Platform Software Serial Communication
- Electric Drive for Locomotives Issue 2, Pages: 111-114(2018)
- 作者机构：
  
  1. 中车株洲所电气技术与材料工程研究院,湖南,株洲,412001
- 作者简介：
- 基金信息：
- DOI：10.13890/j.issn.1000-128x.2017.04.107
  CLC：
扫描看全文
LIU Zhonghua, LI Wenbo, CHEN Bo. Automatic Test Research of LabVIEW Program on Network Control Platform Software Serial Communication. [J]. Electric Drive for Locomotives (2):111-114(2018)
DOI：

LIU Zhonghua, LI Wenbo, CHEN Bo. Automatic Test Research of LabVIEW Program on Network Control Platform Software Serial Communication. [J]. Electric Drive for Locomotives (2):111-114(2018) DOI： 10.13890/j.issn.1000-128x.2017.04.107.

摘要

介绍了网络控制平台类软件串行调试接口的工作原理，提出采用LabVIEW 程序进行网络控制平台类软件自动化测试的设计方法，实现了测试过程中测试指令的自动执行、测试数据的自动采集及保存、测试结果的自动分析处理及存档，弥补了部分性能测试上的不足，有效地提高了测试效率。

Abstract

The serial debug interface working principle of network control platform software was described and automatic test design method with LabVIEW program on network control platform software was provided. By this program, testing commands were executed automatically, testing data would be collected and saved automatically, and testing results could be analyzed automatically. Part of the deficiencies on performance testing was made up, and the efficiency of the test was improved effectively.

关键词

LabVIEW串口通信数据采集自动化测试网络控制平台

Keywords

LabVIEWserial communicationdata collectionautomatic testnetwork control platform

references

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research of General Simulation and Test Platform for Embedded Software

Intelligent Test Design Based on AC-drive Test Platform

Life Test System of Train Driver Controller Based on LabVIEW Software

Research and Application on Drive Tracking and Testing System for High-speed EMUs

A Method of Measurement Parameters Programmatically Configuring for Traction Inverter Based on LabVIEW

Related Author

No data

Related Institution

CRRC ZIC Research Institute of Electrical Technology & Material Engineering

National Engineering Research Center of Converters

State Key Laboratory for Traction and Control System of

CRRC Zhuzhou Institute Co., Ltd.

State Key Laboratory for Traction and Control System of EMU and Locomotive

⁰