Test for Crankcase Location Device of Locomotive and Vehicle

PENG Liqun; LIN Dawen; CHEN Gang; ZHOU Xuexiang; WANG Jin

doi:10.13890/j.issn.1000-128x.2017.01.020

您当前的位置：

首页 >

文章列表页 >

Test for Crankcase Location Device of Locomotive and Vehicle

更新时间：2021-12-13

- Test for Crankcase Location Device of Locomotive and Vehicle
- Electric Drive for Locomotives Issue 1, Pages: 85-88(2017)
- 作者机构：
  
  1. 株洲时代新材料科技股份有限公司,湖南,株洲,412007
- 作者简介：
- 基金信息：
- DOI：10.13890/j.issn.1000-128x.2017.01.020
  CLC：
扫描看全文
PENG Liqun, LIN Dawen, CHEN Gang, et al. Test for Crankcase Location Device of Locomotive and Vehicle. [J]. Electric Drive for Locomotives (1):85-88(2017)
DOI：

PENG Liqun, LIN Dawen, CHEN Gang, et al. Test for Crankcase Location Device of Locomotive and Vehicle. [J]. Electric Drive for Locomotives (1):85-88(2017) DOI： 10.13890/j.issn.1000-128x.2017.01.020.

摘要

为对机车车辆轴箱定位装置进行系统的力学性能试验，简要分析了一种轴箱定位装置的结构与原理，设计了轴箱定位装置单件加载与系统加载2 种试验方案并进行分析比对，重点通过系统加载试验方案来研究轴箱定位装置的刚度和疲劳性能。试验结果表明：试验设计与实际工况一致，系统试验更能准确反映出轴箱定位装置的力学性能，试验数据显示该结构轴箱定位装置纵向刚度呈非线性，横向刚度和垂向刚度呈线性，疲劳性能满足装车要求。

Abstract

In order to test the crankcase location device of locomotive and vehicle systematically, the structure and principle was analyzed, and the two test scheme of single piece loading and system loading was designed and compared, focusing on research of crankcase location device stiffness and fatigue performance for system loading scheme. The test result showed that test design was coincide with practical conditions, and the system test could represent the mechanical properties more accurately. And the test data showed that longitudinal stiffness of the crankcase location device was nonlinear, while the vertical and horizontal stiffness were linear, and the fatigue performance satisfied the on-board requirement.

关键词

轴箱定位装置刚度疲劳性能力学性能试验装置

Keywords

crankcase location devicestiffnessfatigue performancemechanical propertiestest equipment

references

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

Development of mechanical anti-slip resilient wheel

Study on optimization of secondary suspension parameters of double suspension maglev train

Strength Analysis for Motor Car Body of Power Centralized EMU

Study on Composed Stiffness of Rail Vehicles Primary Suspension Tumbler Locating

Research and Manufacture of Anti-rolling Torsion BarEquipment for CRH6 Inter-city EMUs

Related Author

No data

Related Institution

State Key Laboratory of Traction Power, Southwest Jiaotong University

CRRC Tangshan Co., Ltd.

The State Key Laboratory of Systems Integration for High-power AC Drive Electric Locomotive

School of Mechanical Engineering, Southwest Jiaotong University

CSR Zhuzhou Electric Locomotive Co., Ltd.

⁰