FAN Ronghui, FU Jianhui, KANG Zijian, et al. Analysis and verification of key technologies for traction converter of plateau dual-source power centralized diesel multiple units[J]. Electric drive for locomotives,2024(2): 101-107.
FAN Ronghui, FU Jianhui, KANG Zijian, et al. Analysis and verification of key technologies for traction converter of plateau dual-source power centralized diesel multiple units[J]. Electric drive for locomotives,2024(2): 101-107.DOI:10.13890/j.issn.1000-128X.2024.02.012.
Analysis and verification of key technologies for traction converter of plateau dual-source power centralized diesel multiple units
According to the characteristics of plateau diesel locomotives
i.e. high operating altitude
complex heat dissipation conditions and high lightweight requirement
this paper introduces the main circuit structure
working principle and design method for the traction converter of Fuxing plateau dual-source power centralized diesel multiple units(DMU). For high operating altitude
the in-cabinet electrical insulation performance was strengthened by the altitude correction method; for complex heat dissipation conditions
a reasonable cooling scheme was selected and the detailed thermal design for the loss and heat dissipation capability of the whole cabinet was carried out to ensure its heat dissipation capability; for high lightweight requirement
the modular layout and finite element structural simulation method were used to ensure the structural strength and realize lightweight design at the same time. The tests show that the traction converter can meet the requirements of all performance indicators.
YAO Qinchen. Research on the freight transport organization mode and vehicle demand characteristics of the passenger-freight shared railway of 200 km/h in arduous mountainous area on the plateau[D]. Chengdu: Southwest Jiaotong Univertiy, 2021.
XIANG Dongbo. Optimization on traction performance of type HXD1C locomotive with improved adaptability for plateau environment[J]. Electric locomotives & mass transit vehicles, 2018, 41(4): 50-52.
CHEN Mingyi, MA Bole, CHEN Yuqi, et al. Application of low stray inductance bus-bar technology in IGBT converter[J]. High power converter technology, 2012(6): 14-17.
ZHANG Yi, RAO Peinan, CHEN Yanping. Development of TGA18 water-cooling traction converter for diesel locomotive[J]. Electric drive for locomotives, 2012(5): 21-24.
LIN Xin, YING Baosheng, NIE Jinquan, et al. Design and optimization of heat dissipation structure of water-cooled IGBT module[J]. Journal of Chongqing university of technology(natural science), 2021, 35(6): 73-79.
杨世铭, 陶文铨. 传热学[M]. 3版. 北京: 高等教育出版社, 1998.
YANG Shiming, TAO Wenquan. Heat transfer[M]. 3rd ed. Beijing: Higher Education Press, 1998.
China Academy of Railway Sciences Group Co., Ltd. Institute of Standard Metrology. Strength design and test accreditation specification for rolling stock-car body-part 1: passenger car bodies: TB/T 3550.1—2019[S]. Beijing: China Railway Publishing House, 2019.
ZOU Baisu, LIU Yongjiang, HE Liang, et al. Traction convertor of HXN6 hybrid power diesel locomotive[J]. Electric drive for locomotives, 2017(6): 32-36.
National Technical Committee 278 on Electric Equipment and Systems for Railways of Standardization Administration of China. Railway applications—rolling stock equipment—shock and vibration tests: GB/T 21563—2018[S]. Beijing: Standards Press of China, 2018.
National Technical Committee 278 on Electric Equipment and Systems for Railways of Standardization Administration of China. Railway applications—insulation coordination—part 1:basic requirements—clearances and creepage distances for all electrical and electronic equipment: GB/T 32350.1—2015[S]. Beijing: Standards Press of China, 2016.
CSR Zhuzhou Institute Co., Ltd.. General technical specification of electric and electronic products-used on rolling stock for plateau: TB/T 3213—2009[S]. Beijing: China Railway Publishing House, 2009.
FAN Ronghui, QIN Fangfang, GUO Junbo, et al. IGBT traction converter of electric locomotives for altiplano[J]. Electric drive for locomotives, 2012(3): 70-74.
National Technical Committee 278 on Electric Equipment and Systems for Railways of Standardization Administration of China. Railway applications—power converters installed on board rolling stock-part 1: characteristics and test methods: GB/T 25122.1—2018[S]. Beijing: Standards Press of China, 2018.