Dynamic analysis and improvement of grounding return performance of metro vehicles

LU Qing; QI Fang; WANG Zhe; CHEN Zhiwen; SONG Kejian; YANG Shaobing

doi:10.13890/j.issn.1000-128X.2022.02.017

您当前的位置：

首页 >

文章列表页 >

Dynamic analysis and improvement of grounding return performance of metro vehicles

Key Technology and Materials | 更新时间：2024-08-02

- Dynamic analysis and improvement of grounding return performance of metro vehicles
- Electric drive for locomotives Issue 2, Pages: 121-128(2022)
- 作者机构：
  
  1.中车南京浦镇车辆有限公司，江苏　南京 210031
  2.北京交通大学电气工程学院，北京;100044
- 作者简介：
- 基金信息：
- DOI：10.13890/j.issn.1000-128X.2022.02.017
  CLC： U231⁺.8
- Published：10 March 2022，
  
  Received：29 November 2021，
  
  Revised：02 March 2022，
- 稿件说明：
扫描看全文
LU Qing, QI Fang, WANG Zhe, et al. Dynamic analysis and improvement of grounding return performance of metro vehicles. [J]. Electric drive for locomotives (2):121-128(2022)
DOI：

LU Qing, QI Fang, WANG Zhe, et al. Dynamic analysis and improvement of grounding return performance of metro vehicles. [J]. Electric drive for locomotives (2):121-128(2022) DOI： 10.13890/j.issn.1000-128X.2022.02.017.

摘要

本文分析地铁车辆在牵引供电系统中的回流性能，并提出车辆接地优化设计方案。针对常用时域仿真分析方法无法准确连续反映车辆整体运行过程的不足，提出一种用于地铁车辆接地回流性能分析的车网联合动态仿真技术方案。以车体采用经保护电阻接地和直接接地两种技术方案的实际车型为研究对象，在通用仿真环境下建立包含车体、车辆接地电路、牵引负荷、钢轨回流电路以及供电网络的综合模型。基于地铁线路和车辆关键参数获得牵引计算结果，并将其导入仿真模型，实现车辆牵引功率、受流位置持续动态刷新，从而模拟车辆运行过程接地回流分布特性。仿真分析表明，在同一线路采用相同牵引控制策略时，经保护电阻接地车型较直接接地车型有更小的钢轨至车体回流以及车体间电流，但车体电位略有抬升；并进一步基于电阻接地电路提出了两种优化接地设计方案，仿真结果证明这两种方案均兼顾了整车的车体回流与电位抑制。该仿真方法对校验地铁车辆接地方案性能具有实用性，所得仿真结果对接地设计具有一定的参考价值。

Abstract

The return performance of metro vehicles in the traction power supply system was analyzed

and an improved design for vehicle grounding was proposed. Since the metro vehicle operation process cannot be accurately and continuously performed by conventional time-domain simulations

a network-vehicle interaction dynamic simulation scheme was proposed for analyzing the grounding return performance of metro vehicles. Taking the two actual metro types

adopting resistor grounding and direct grounding respectively

as the objects of study

comprehensive models consisting of the vehicle body

grounding circuit

traction load

rail return circuit and power supply network were developed in the general simulation environment. Based on the key parameters of the metro line and vehicle

traction calculation results were acquired

and then were imported into the models

which achieved continuous update of the vehicle traction load and associated position

so as to simulate the grounding return distribution during the vehicle operation process. Simulation analysis verified that in the same line with the same traction strategy

the model grounded via protective resistor had less car body-rail return current and inter-car body current than the directly grounded model

but its car body potential was slightly raised. Further

two improved designs based on the resistor grounding scheme were proposed. Simulation results show that both the designs strike a balance between car body return current and potential suppression of a whole metro train. The proposed simulation method is useful for verifying the performance of metro vehicle grounding

and the simulation results can be as a reference for the grounding design.

关键词

地铁车辆接地回流牵引计算动态仿真

Keywords

metro vehiclegrounding returntraction calculationdynamic simulation

references

王欢. 牵引供电系统地回流分析及接地网交流电腐蚀问题研究[D]. 北京: 北京交通大学, 2015.

WANG Huan. Research on distribution of grounding return current and ac corrosion of grounding grid for traction power supply system[D]. Beijing: Beijing Jiaotong University, 2015.

JACIMOVIC S D. Maximum permissible values of step and touch voltages with special consideration to electrified railroads[J]. IEEE Transactions on Industry Applications, 1984, IA-20(4): 935-941.

千岛伸雄, 钱仲毅. 电力机车接地系统的改进[J]. 电力机车技术, 1985(3): 34-39.

Hiroshi Qiandao, QIAN Zhongyi. The improvement of electric locomotive grounding system[J]. Electric Locomotive Technology, 1985(3): 34-39.

张维国. 客车车体转向架电气接地问题探讨[J]. 铁道车辆, 2000, 38(11): 21-23.

ZHANG Weiguo. Discussion of electrical grounding of carbody and bogie of passenger car[J]. Rolling Stock, 2000, 38(11): 21-23.

刘莹, 陈维金, 李枫, 等. 高速动车组齿轮箱接地装置用碳刷性能对比试验[J]. 机车车辆工艺, 2011(6): 37-38.

LIU Ying, CHEN Weijin, LI Feng, et al. High-speed EMU gear box grounding device with carbon brush performance contrast test[J]. Locomotive & Rolling Stock Technology, 2011(6): 37-38.

张维国. 客车转向架接地技术[J]. 铁道车辆, 2004, 42(3): 9-14.

ZHANG Weiguo. Grounding technique of passenger car bogies[J]. Rolling Stock, 2004, 42(3): 9-14.

何洋阳, 黄康, 王涛, 等. 轨道交通牵引供电系统综述[J]. 铁道科学与工程学报, 2016, 13(2): 352-361.

HE Yangyang, HUANG Kang, WANG Tao, et al. Overview of traction power supply system for rail transportation[J]. Journal of Railway Science and Engineering, 2016, 13(2): 352-361.

朱剑, 朱成乾. 城市轨道交通多区间杂散电流与钢轨电位分布研究[J]. 中国科技信息, 2020(11): 90-91.

ZHU Jian, ZHU Chengqian. Study of stray currents and rail potential distribution between multiple zones for urban rail transportation[J]. China Science and Technology Information, 2020(11): 90-91.

王晋伟. 整车EMC接地设计与仿真研究[D]. 大连: 大连交通大学, 2019.

WANG Jinwei. Research on EMC grounding design and simulation of whole vehicle[D]. Dalian: Dalian Jiaotong University, 2019.

杨兵, 许利利. 地铁车辆保护接地技术研究[J]. 自动化应用, 2019(5): 150-151.

YANG Bing, XU Lili. Research on metro vehicle protection and grounding technology[J]. Automation Application, 2019(5): 150-151.

李张群, 谭万忠, 钟杰. 地铁车辆保护接地技术研究[J]. 现代城市轨道交通, 2018(4): 30-34.

LI Zhangqun, TAN Wanzhong, ZHONG Jie. Research on metro vehicle protection grounding technology[J]. Modern Urban Transit, 2018(4): 30-34.

朱军, 王健全, 李林森. 城轨车辆接地系统设计[J]. 铁道车辆, 2009, 47(1): 26-27.

ZHU Jun, WANG Jianquan, LI Linsen. Design of grounding system for urban railway vehicles[J]. Rolling Stock, 2009, 47(1): 26-27.

陈艺铭, 贾海杰. 城轨车辆接地方式分析与改进[J]. 电气传动, 2016, 46(1): 77-80.

CHEN Yiming, JIA Haijie. Urban rail vehicle grounding method analysis and improvement[J]. Electric Drive, 2016, 46(1): 77-80.

郝明远, 傅振亮, 汪星华, 等. 地铁车辆接地系统研究[J]. 机车电传动, 2020(6): 132-136.

HAO Mingyuan, FU Zhenliang, WANG Xinghua, et al. Study on grounding system of the metro vehicles[J]. Electric Drive for Locomotives, 2020(6): 132-136.

周利军, 李沃阳, 周猛, 等. 市域动车组接地回流特性分析及保护接地系统优化[J]. 中国铁道科学, 2021, 42(3): 127-135.

ZHOU Lijun, LI Woyang, ZHOU Meng, et al. Analysis of grounding reflux characteristics and optimization of protective grounding system for EMUs in urban area[J]. China Railway Science, 2021, 42(3): 127-135.

李石. 动车组保护接地方案研究[D]. 北京: 北京交通大学, 2013.

LI Shi. Research on the protective grounding scheme of electric multiple units[D]. Beijing: Beijing Jiaotong University, 2013.

薄其帆. 城市轨道交通牵引负荷特性分析[D]. 北京: 北京交通大学, 2020.

BO Qifan. Analysis of traction load characteristics of urban rail transit[D]. Beijing: Beijing Jiaotong University, 2020.

魏晓斌. 高速动车组过吸上线过程接地回流分布研究[D]. 成都: 西南交通大学, 2017.

WEI Xiaobin. Study on the grounding return current distribution in the process of passing the boosting cable of high-speed EMU[D]. Chengdu: Southwest Jiaotong University, 2017.

王璐璐. 基于DCAT牵引供电系统的地铁杂散电流治理技术[D]. 北京: 北京交通大学, 2019.

WANG Lulu. Research on metro stray current control technology based on DCAT traction power supply system[D]. Beijing: Beijing Jiaotong University, 2019.

汪孔屏. 浅议轨道交通直流牵引供电系统的构成及保护配置[J]. 上海电器技术, 2005(4): 33-38.

WANG Kongping. The structure and DC protection of traction power supply system in urban rail transit system[J]. Shanghai Electric Appliance Technology, 2005(4): 33-38.

李墨雪. 直流牵引供电系统建模及基于电流变化特征量的保护算法研究[D]. 北京: 北京交通大学, 2010.

LI Moxue. Modeling for DC traction power supply system and development of protection algorithm based on discrimination of current characteristic quantity[D]. Beijing: Beijing Jiaotong University, 2010.

Views

下载量

CSCD

CNKI被引量

Alert me when the article has been cited

提交

Tools

Publicity Resources

A study on life assessment of metro cowcatcher based on multi-axis vibration environment reconstruction

Arcing detection method of metro pantograph based on improved yolov4-tiny

Study on abnormal abrasion of metro pantograph

Research on random vibration fatigue of high-voltage electrical box based on FKM standard

Multi-field coupling modeling and temperature rise analysis for the static pantograph-catenary electrical contact of metro trains

Related Author

ZHENG Yuhao

WU Xingwen

LIU Yang

CHI Maoru

LIANG Shulin

AI Shengyong

DING Jianming

ZHANG Qingsong

Related Institution

State Key Laboratory of Rail Transit Vehicle System, Southwest Jiaotong University

School of Mechanical Engineering, Southwest Jiaotong University

CRRC Changchun Railway Vehicles Co., Ltd.

Zhuzhou CRRC Times Electric Co., Ltd.

Shanghai Engineering Research Center for Vibration and Noise Control Technologies in Railway Transportation

⁰