
浏览全部资源
扫码关注微信
株洲中车时代电气股份有限公司,湖南 株洲 412001
贺冠强,男,博士,正高级工程师,主要从事变流器的研发工作;E-mail: 398589787@qq.com
纸质出版日期:2024-07-10,
收稿日期:2024-01-16,
修回日期:2024-06-06,
移动端阅览
曾祥浩, 张晓, 贺冠强, 等. 基于高速动车组服役环境下的功率器件主端子连接结构设计与评价[J]. 机车电传动, 2024(4): 41-50.
ZENG Xianghao, ZHANG Xiao, HE Guanqiang, et al. Design and evaluation of main terminal connectors for power modules in the service environment of high-speed EMUs[J]. Electric drive for locomotives,2024(4): 41-50.
曾祥浩, 张晓, 贺冠强, 等. 基于高速动车组服役环境下的功率器件主端子连接结构设计与评价[J]. 机车电传动, 2024(4): 41-50. DOI:10.13890/j.issn.1000-128X.2024.04.005.
ZENG Xianghao, ZHANG Xiao, HE Guanqiang, et al. Design and evaluation of main terminal connectors for power modules in the service environment of high-speed EMUs[J]. Electric drive for locomotives,2024(4): 41-50. DOI:10.13890/j.issn.1000-128X.2024.04.005.
为了提高高速动车组服役环境下功率器件主端子连接结构的服役可靠性,文章通过有限元分析对IGBT器件主端子结构焊层的疲劳可靠性进行研究,并且运用不同的理论预测焊层疲劳寿命并通过功率循环试验进行了验证。结果表明,随着主端子焊层孔洞率的增加,循环周次会降低,但影响并不明显。随着主端子焊层厚度逐渐增加,循环周次呈现出先增加后减少的变化规律。在功率循环过程中,主端子结构焊层的退化表现为灰色含Sn相的粗化,采用基于能量的Darveaux模型进行分析更加符合功率器件主端子结构焊层的退化过程。故在主端子结构中,影响其服役寿命的主要因素为焊层厚度。
This paper aims to improve the service reliability of main terminal connectors for power modules in the service environment of high-speed EMUs. To achieve this
the fatigue reliability of the solder layers in the main terminal structure of insulated-gate bipolar transistors (IGBTs) was studied through finite element analysis. In addition
the fatigue life of the solder layers was predicted by leveraging different theories and the prediction results were verified by power cycle experiments. The study results show that the number of cycles decreases slightly with the increase in the void rate of the solder layers. Additionally
as the solder layer thickness increases
the number of cycles initially increases before subsequently decreasing. During the power cycle experiments
the degradation of the solder layers manifests as the coarsening of the grey phase containing Sn. The analysis obtained using the energy-based Darveaux model more closely aligns with the degradation process of the solder layers in the main terminal structure of IGBTs. Hence
the thickness of solder layers is identified as the primary influencing factor on the service life of the main terminal structure.
高速动车组IGBT焊层疲劳可靠性有限元分析
high-speed EMUinsulated-gate bipolar transistors (IGBT) solder layer fatiguereliabilityfinite element analysis
王兆安, 杨旭, 王晓宝. 电力电子集成技术的现状及发展方向[J]. 电力电子技术, 2003, 37(5): 90-94.
WANG Zhaoan, YANG Xu, WANG Xiaobao. State-of-art and development trends of power electronics integration technology[J]. Power electronics, 2003, 37(5): 90-94.
王彬, 曹琳. 轨道交通用IGBT器件寿命预测技术综述[J]. 机车电传动, 2020(1): 9-12.
WANG Bin, CAO Lin. IGBT module lifetime prediction technology for rail transit[J]. Electric drive for locomotives, 2020(1): 9-12.
吴义伯, 戴小平, 王彦刚, 等. IGBT功率模块封装中先进互连技术研究进展[J]. 大功率变流技术, 2015(2): 6-11.
WU Yibo, DAI Xiaoping, WANG Yangang, et al. State-of-the-art progress of advanced interconnection technology for IGBT power module packaging[J]. High power converter technology, 2015(2): 6-11.
刘放飞. 大规模互联单板有限元仿真分析与寿命预测[J]. 电子产品可靠性与环境试验, 2020, 38(4): 10-17.
LIU Fangfei. The finite element analysis and life prediction of large-scale interconnection veneer[J]. Electronic product reliability and environmental testing, 2020, 38(4): 10-17.
李辉, 王晓, 姚然, 等. 计及内部材料疲劳的压接型IGBT器件可靠性建模与分析[J]. 中国电力, 2019, 52(9): 30-37.
LI Hui, WANG Xiao, YAO Ran, et al. Reliability modeling and analysis of press-pack IGBTs considering internal material fatigue[J]. Electric power, 2019, 52(9): 30-37.
徐凝华, 彭勇殿, 罗海辉, 等. 热循环过程中IGBT模块封装退化研究[J]. 大功率变流技术, 2016(4): 23-29.
XU Ninghua, PENG Yongdian, LUO Haihui, et al. Study of the package degradation of IGBT module during thermal cycling test[J]. High power converter technology, 2016(4): 23-29.
江南. 计及疲劳累积效应的IGBT模块焊料层失效机理及疲劳损伤研究[D]. 重庆: 重庆大学, 2016.
JIANG Nan. Study on failure mechanism and fatigue damage of the solder layer in the IGBT module considering cumulative damage[D]. Chongqing: Chongqing University, 2016.
吴煜东, 常桂钦, 彭勇殿, 等. 焊层空洞对IGBT模块热应力的影响[J]. 大功率变流技术, 2014(1): 17-23.
WU Yudong, CHANG Guiqin, PENG Yongdian, et al. Effect of solder voids on IGBT thermal and stress performance[J]. High power converter technology, 2014(1): 17-23.
王祥林. 含随机孔洞BGA焊点热疲劳寿命预测方法研究[D]. 南京: 南京航空航天大学, 2018.
WANG Xianglin. Study on prediction method of thermal fatigue life for BGA solder joints with random void[D].
Nanjing: Nanjing University of Aeronautics and Astronautics, 2018.
张亮, 韩继光, 郭永环, 等. SnAgCu-nano Al钎料Anand本构关系及焊点可靠性[J]. 电子科技大学学报, 2015(3): 471-474.
ZHANG Liang, HAN Jiguang, GUO Yonghuan, et al. Anand constitutive relation of SnAgCu-nano Al and the reliability of solder joints[J]. Journal of university of electronic science and technology of China, 2015(3): 471-474.
李志刚, 李雄, 孔梅娟, 等. IGBT寿命评估中解析预测模型综述[J]. 微电子学, 2017, 47(3): 396-400.
LI Zhigang, LI Xiong, KONG Meijuan, et al. Review of prediction models in IGBT lifetime estimation[J]. Microelectronics, 2017, 47(3): 396-400.
SOLOMOM H. Fatigue of 60/40 solder[J]. IEEE transaction on component, hybrid, and manufacturing technology, 1986, 9(4): 423-432.
韩潇, 丁汉, 盛鑫军, 等. CSP封装Sn-3.5Ag焊点的热疲劳寿命预测[J]. 半导体学报, 2006, 27(9): 1695-1700.
HAN Xiao, DING Han, SHENG Xinjun, et al. Thermal fatigue life time prediction of Sn-3.5Ag lead-free solder joint for chip scale package[J]. Journal of semiconductors, 2006, 27(9): 1695-1700.
DARVEAUX R. Effect of simulation methodology on solder joint crack growth correlation[C]//IEEE. 2000 Proceedings of 50th Electronic Components and Technology Conference. Las Vegas: IEEE, 2000: 1048-1058.
牛飘. 极端温度环境下Sn基钎料本构方程建立[D]. 哈尔滨: 哈尔滨工业大学, 2021.
NIU Piao. Establishment of constitutive equation of tin-based solder under extreme temperature environment[D]. Harbin: Harbin Institute of Technology, 2021.
0
浏览量
0
下载量
0
CSCD
0
CNKI被引量
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621