[1]梁 云,贾洪龙,张英春,等.200 km/h 速度铁路客车转向架设计[J].机车电传动,2020,(06):1.[doi:10.13890/j.issn.1000-128x.2020.06.111]
 LIANG Yun,JIA Honglong,ZHANG Yingchun,et al. Design of 200 km/h Passenger-Coaches’ Bogie[J].Electric Drive for Locomotives,2020,(06):1.[doi:10.13890/j.issn.1000-128x.2020.06.111]
点击复制

200 km/h 速度铁路客车转向架设计()
分享到:

机车电传动[ISSN:1000-128X/CN:43-1125/U]

卷:
期数:
2020年06期
页码:
1
栏目:
研究开发
出版日期:
2021-01-31

文章信息/Info

Title:
 Design of 200 km/h Passenger-Coaches’ Bogie
作者:
 梁 云贾洪龙张英春陈 丞沙 迪吕常秀王一淞
 (中车长春轨道客车股份有限公司 国家轨道客车工程研究中心,吉林 长春 130062)
Author(s):
 LIANG Yun JIA Honglong ZHANG Yingchun CHEN Cheng SHA Di LYU Changxiu WANG Yisong
 ( National Railway Vehicles Engineering Research Center, CRRC Changchun Railway Vehicles Co., Ltd.,Changchun, Jilin 130062, China )
关键词:
 高速列车转向架结构设计仿真
Keywords:
 high-speed train bogie structure design simulation
分类号:
U271.91;U270.331
DOI:
10.13890/j.issn.1000-128x.2020.06.111
文献标志码:
A
摘要:
 结合200 km/h 客车转向架的运用特点,对关键零部件进行了详细的选型分析,提出200 km/h 客车转向架采用无联系枕梁结构,转向架与车体直接连接的方式。完成并通过了构架强度试验和动力学计算。试验表明,200 km/h 客车转向架通过调整悬挂参数可实现160~250 km/h 不同线路条件的运用需求。
Abstract:
 Combined with the application characteristics of 200 km/h passenger car bogies, the selection and analysis of key components were carried out in detail. It was proposed that the 200 km/h passenger car bogies adopt the structure of unconnected sleeper beam and the mode of direct connection between bogie and car body. The frame strength test and dynamic calculation were completed and passed. The test results showed that the 200 km/h passenger car bogie could meet the requirements of different line conditions from 160 km/h to 250 km/h by adjusting the suspension parameters.

参考文献/References:

 [1] 梁云, 李文学, 王云朋. 轨道交通车辆抗侧滚结构形式的选型分析[J]. 城市轨道交通研究, 2017, 20(2): 20-24.
[2] 徐国林. 铁路客车抗侧滚扭杆装置存在的问题及改进建议[J]. 铁道车辆, 2013, 51(6): 41-43.
[3] 苗秀娟, 何侃. 高速列车转向架区域积雪形成原因及防积雪研究[J]. 中南大学学报(自然科学版), 2018, 49(3): 756-763.
[4] 许淑萍. 200 km/h 客运电力机车转向架构架轻量化设计[J]. 科技创新与生产力, 2018(6): 98-100.
[5] 王子栋, 李靓怡, 张超, 等. 铁路客车转向架构架组焊工艺研究[J]. 城市轨道交通研究, 2020, 23(2): 131-132.
[6] 朱志敏. 铁路客车轴端防松片失效分析及改进探究[J]. 内燃机与配件, 2017(23): 93-94.

相似文献/References:

[1]张卫华.高速列车耦合大系统动力学创新研究体系[J].机车电传动,2015,(04):1.[doi:10.13890/j.issn.1000-128x.2015.04.001]
 ZHANG Weihua.Study on Innovation System of Coupling Relations Dynamics in High-speed Trains[J].Electric Drive for Locomotives,2015,(06):1.[doi:10.13890/j.issn.1000-128x.2015.04.001]
[2]王广明,范乐天,魏庆龙,等.基于焊缝疲劳寿命分析的高速列车裙板结构设计[J].机车电传动,2015,(05):46.[doi:10.13890/j.issn.1000-128x.2015.05.013]
 WANG Guangming,FAN Letian,WEI Qinglong,et al.EMUs Apron Board Structural Design Based on Weld Fatigue Life Analysis[J].Electric Drive for Locomotives,2015,(06):46.[doi:10.13890/j.issn.1000-128x.2015.05.013]
[3]王华,崔利通.高速列车传动系统机电耦合仿真与分析[J].机车电传动,2015,(02):31.[doi:10.13890/j.issn.1000-128x.2015.02.009]
 WANG Hua,CUI Litong.Simulation and Analysis of Electromechanical Integration for Drive System in High-speed Trains[J].Electric Drive for Locomotives,2015,(06):31.[doi:10.13890/j.issn.1000-128x.2015.02.009]
[4]崔涛,王 琰,吴会超,等.高速列车悬挂参数全局优化方法[J].机车电传动,2015,(01):15.[doi:10.13890/j.issn.1000-128x.2015.01.004]
 CUI Tao,WANG Yan,WU Huichao,et al.Global Optimization of Suspension Parameters for High-speed Train[J].Electric Drive for Locomotives,2015,(06):15.[doi:10.13890/j.issn.1000-128x.2015.01.004]
[5]丁荣军,张志学,李红波. 轨道交通能源互联网的思考[J].机车电传动,2016,(01):1.[doi:10.13890/j.issn.1000-128x.2016.01.001]
 DING Rongjun,ZHANG Zhixue,LI Hongbo. An Overview on Rail Transit Energy Internet[J].Electric Drive for Locomotives,2016,(06):1.[doi:10.13890/j.issn.1000-128x.2016.01.001]
[6]秦勇,林 帅,李宛瞳,等.高速列车系统安全可靠性分析评估方法研究[J].机车电传动,2016,(01):6.[doi:10.13890/j.issn.1000-128x.2016.01.002]
 QIN Yong,LIN Shuai,LI Wantong,et al.Research on Safety Reliability Analysis and Evaluation Methodof High-speed Train System[J].Electric Drive for Locomotives,2016,(06):6.[doi:10.13890/j.issn.1000-128x.2016.01.002]
[7]胡基贵,刘天赋. 从现代有轨电车技术的发展看中国研究方向[J].机车电传动,2016,(02):1.[doi:10.13890/j.issn.1000-128x.2016.02.001]
 Hu Jigui,Liu Tianfu. Technical Development Direction of China Modern Tramcar[J].Electric Drive for Locomotives,2016,(06):1.[doi:10.13890/j.issn.1000-128x.2016.02.001]
[8]杨卫峰,冯江华,易伟民.高速列车网络控制系统安全性设计[J].机车电传动,2014,(03):14.[doi:10.13890/j.issn.1000-128x.2014.03.003]
 YANG Wei-feng,FENG Jiang-hua,YI Wei-min.Safety Design of Network Control System in High-speed Train[J].Electric Drive for Locomotives,2014,(06):14.[doi:10.13890/j.issn.1000-128x.2014.03.003]
[9]冯万盛,程畅,程海涛,等.高速车变压器用橡胶减振器研究[J].机车电传动,2014,(01):44.[doi:10.13890/j.issn.1000-128x.2014.01.010]
 FENG Wan-sheng,CHENG Chang,CHENG Hai-tao,et al.Research of Transformer Rubber Damper for High-speed Train[J].Electric Drive for Locomotives,2014,(06):44.[doi:10.13890/j.issn.1000-128x.2014.01.010]
[10]黄彩虹,等.高速车辆车体低频横向晃动的影响因素研究[J].机车电传动,2014,(01):16.[doi:10.13890/j.issn.1000-128x.2014.01.003]
 HUANG Cai-hong,LIANG Shu-lin,et al.Study on Influence Factors of Low-frequency CarbodySwaying for High-speed Vehicles[J].Electric Drive for Locomotives,2014,(06):16.[doi:10.13890/j.issn.1000-128x.2014.01.003]
[11]杨忠坤,缪炳荣,张晓霞,等. 高速列车齿轮箱流场仿真研究[J].机车电传动,2017,(02):1.[doi:10.13890/j.issn.1000-128x.2017.02.103]
 YANG Zhongkun,MIAO Bingrong,ZHANG Xiaoxia,et al. Flow Field Simulation for High Speed Train Gearbox[J].Electric Drive for Locomotives,2017,(06):1.[doi:10.13890/j.issn.1000-128x.2017.02.103]
[12]李旭娟,缪炳荣,史艳民,等. 高速列车比例车体侧墙试验模态分析[J].机车电传动,2017,(03):1.[doi:10.13890/j.issn.1000-128x.2017.03.106]
 LI Xujuan,MIAO Bingrong,SHI Yanmin,et al. Experimental Modal Analysis of Scaled Car-body Sidewall for High-speed Vehicles[J].Electric Drive for Locomotives,2017,(06):1.[doi:10.13890/j.issn.1000-128x.2017.03.106]
[13]孙环阳,罗飞平,王 群,等. 高速列车防滑控制策略研究[J].机车电传动,2017,(05):1.[doi:10.13890/j.issn.1000-128x.2017.05.102]
 SUN Huanyang,LUO Feiping,WANG Qun,et al. Study of Wheel-slide-protection Strategy of High-speed EMUs[J].Electric Drive for Locomotives,2017,(06):1.[doi:10.13890/j.issn.1000-128x.2017.05.102]
[14]李大地,戴焕云. 基于钢轨模态振动的车轮高阶多边形研究[J].机车电传动,2018,(01):1.[doi:10.13890/j.issn.1000-128x.2018.01.106]
 LI Dadi,DAI Huanyun. Research on Wheel Polygonization Based on Rail Modal Oscillation Analysis[J].Electric Drive for Locomotives,2018,(06):1.[doi:10.13890/j.issn.1000-128x.2018.01.106]
[15]汪 煌,钟文生,姚 远,等. 轮对安装偏转角对高速列车车轮磨耗的影响[J].机车电传动,2018,(04):1.[doi:10.13890/j.issn.1000-128x.2018.04.105]
 WANG Huang,ZHONG Wensheng,YAO Yuan,et al. Influence of Wheelset Installation Deflection Angle on Wheel Wear of High-speed Train[J].Electric Drive for Locomotives,2018,(06):1.[doi:10.13890/j.issn.1000-128x.2018.04.105]
[16]王海龙,魏领会,姚灿江.高速列车齿轮箱齿轮副接触应力分析[J].机车电传动,2019,(01):1.[doi:10.13890/j.issn.1000-128x.2019.01.117]
 WANG Hailong,WEI Linghui,YAO Canjiang. Analysis of Gear Contact Stress of High-speed Train Gearbox[J].Electric Drive for Locomotives,2019,(06):1.[doi:10.13890/j.issn.1000-128x.2019.01.117]
[17]蒋 威. 动车组变流器中间直流电压保持控制策略研究[J].机车电传动,2010,(02):1.[doi:10.13890/j.issn.1000-128x.2019.02.110]
 JIANG Wei, Research on DC-link Voltage Hold Control Strategy for EMUs Converter[J].Electric Drive for Locomotives,2010,(06):1.[doi:10.13890/j.issn.1000-128x.2019.02.110]
[18]刘金榕,王佳佳,饶沛南,等. CRH2 型动车组辅助电源装置135 故障分析及处理[J].机车电传动,2010,(02):1.[doi:10.13890/j.issn.1000-128x.2019.02.129]
 [J].Electric Drive for Locomotives,2010,(06):1.[doi:10.13890/j.issn.1000-128x.2019.02.129]
[19]段华东,肖典喜,袁文辉. 气动载荷对高速动车组的设备舱强度影响研究[J].机车电传动,2019,(03):1.[doi:10.13890/j.issn.1000-128x.2019.03.114]
 DUAN Huadong,XIAO Dianxi,YUAN Wenhui. Strength Analysis of High-speed EMUs Equipment Cabin under Influence of Aerodynamic Loads[J].Electric Drive for Locomotives,2019,(06):1.[doi:10.13890/j.issn.1000-128x.2019.03.114]
[20]沈 迪,陈未敏,周明磊,等. 不同调制方式下异步牵引电动机谐波损耗的分析与比较[J].机车电传动,2019,(03):1.[doi:10.13890/j.issn.1000-128x.2019.03.111]
 SHEN Di,CHEN Weimin,ZHOU Minglei,et al. Analysis and Comparison of Harmonic Losses of Asynchronous Traction Motor under Different Modulation Strategy[J].Electric Drive for Locomotives,2019,(06):1.[doi:10.13890/j.issn.1000-128x.2019.03.111]

备注/Memo

备注/Memo:
 作者简介:梁 云(1980—),男,硕士,教授级高级工程师,现从事转向架研发工作。
更新日期/Last Update: 2020-11-16