[1]陈 杰,孙维光,郑 伟,等.高速列车几种车下设备悬挂参数设计方法对比分析[J].机车电传动,2020,(04):103-107.[doi:10.13890/j.issn.1000-128x.2020.04.112]
 CHEN Jie,SUN Weiguang,ZHENG Wei,et al.Comparison and Analysis of Several Design Methods for SuspensionParameters of Undercar Equipment in High-speed Trains[J].Electric Drive for Locomotives,2020,(04):103-107.[doi:10.13890/j.issn.1000-128x.2020.04.112]
点击复制

高速列车几种车下设备悬挂参数设计方法对比分析()
分享到:

机车电传动[ISSN:1000-128X/CN:43-1125/U]

卷:
期数:
2020年04期
页码:
103-107
栏目:
研 究 开 发
出版日期:
2020-07-10

文章信息/Info

Title:
Comparison and Analysis of Several Design Methods for SuspensionParameters of Undercar Equipment in High-speed Trains
文章编号:
1000-128X(2020)04-0103-05
作者:
陈 杰1孙维光2郑 伟2张立民1贺小龙 3
(1.西南交通大学 牵引动力国家重点实验室,四川 成都 610031;2. 中车青岛四方机车车辆股份有限公司,山东 青岛 266111;3. 重庆文理学院 智能制造工程学院,重庆 402160)
Author(s):
CHEN Jie1 SUN Weiguang2 ZHENG Wei2 ZHANG Limin1 HE Xiaolong 3
( 1. State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu, Sichuan 610031, China;2. CRRC Qingdao Sifang Co., Ltd., Qingdao, Shandong 266111, China;3. School of Intelligent Manufacturing Engineering, Chongqing University of Arts
关键词:
高速列车车辆设备耦合系统悬挂参数隔振设计动力吸振器动态设计法轨道不平顺
Keywords:
high-speed train vehicle equipment coupling system suspension parameters vibration isolation design dynamic vibration absorber dynamic design method track irregularity
分类号:
U270.3;U292.91+4
DOI:
10.13890/j.issn.1000-128x.2020.04.112
文献标志码:
A
摘要:
为验证高速列车车下设备悬挂参数设计方法的可行性,对目前主要的3种设计方法的应用效果进行了对比分析。首先阐述了隔振设计法、动力吸振器法和动态设计3种方法理论和应用条件;接着以国内某型高速列车牵引变压器悬挂参数设计为例,分别基于3种方法对变压器悬挂参数进行了设计;最后将所设计的悬挂参数代入所建立的车辆设备系统模型中,求解出车辆设备系统的振动特性,从而对比分析了3种设计方法的可行性。研究结果表明,隔振设计法和动力吸振器设计法均未考虑车体设备的耦合振动特性和设备自身振动特性,根据动态设计法将变压器悬挂频率比设计为0.90~1.10时车辆既能拥有较好的乘坐舒适性,变压器也能拥有较好的振动水平;相比传统的2种车下设备设计法,动态设计法具有更高的可行性。研究结论可以为车下设备悬挂参数的设计方法选择提供依据。
Abstract:
In order to verify the feasibility of the suspension parameters design methods of undercar equipment of high-speed trains, this paper compared and analyzed the application effects of the three design methods. Firstly, the application conditions of vibration isolation design method, dynamic vibration absorber design method and dynamic design method were described respectively. Then, the suspension parameter of traction transformer of a certain type of high-speed train in China was taken as an example, and the suspension parameter of transformer was designed based on three methods respectively. Finally, the designed suspension parameters were substituted into the model of the vehicle equipment system, and the feasibility of the three design methods were compared and analyzed. The result showed that, the vibration isolation design method and dynamic vibration absorber design method had not considered vehicle equipment coupled vibration characteristics and device excitation itself. According to the dynamic design method, the transformer suspension parameter was chosen 0.90-1.10 when the vehicle system could both have better ride comfort and transformer could also has good vibration characteristic. The dynamic design method was more feasible than the traditional two methods. The conclusions of this paper could provide a basis for the design method selection of suspension parameters of undercar equipment in railway vehicles.

参考文献/References:

[1] 贺小龙, 张立民, 鲁连涛, 等. 基于轻量化及刚度的铝合金车体承载结构参数选择研究[J].铁道学报, 2016, 38(11): 26-32.

[2] 王晨. 车体与动力包设备耦合振动分析[D]. 成都: 西南交通大学, 2014.
[3] 陈志辉, 翟婉明, 吕凯凯, 等. 悬挂式单轨车辆悬挂参数对运行平稳性的影响研究[J]. 铁道科学与工程学报, 2018, 15(10): 2647-2653.
[4] DUMITRIU M. Influence of the vertical suspension on the vibration behavior in the railway vehicles[J]. Annals of the University of Petrosani Mechanical Engineering, 2011, 13 : 35-50.
[5] GONG D, ZHOU J S, SUN W J. On the resonant vibration of a flexible railway car body and its suppression with a dynamic vibration absorber[J]. Journal of Vibration and Control, 2013, 19(5): 649-657.
[6] SUN W, GONG D, ZHOU J, et al. Influences of suspended equipment under car body on high-speed train ride quality[J]. Procedia Engineering, 2011, 16: 812-817.
[7] LUO G, ZENG J, WANG Q. Identifying the relationship between suspension parameters of underframe equipment and carbody modal frequency[J]. Journal of Modern Transportation, 2014, 22(4): 206-213.
[8] ZHOU J, GOODALL R M, REN L, et al. Influences of car body vertical flexibility on ride quality of passenger railway vehicles[J]. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2009, 223(5): 461-471.
[9] 贺小龙, 张立民, 张富兵, 等. 高速列车牵引变压器悬挂参数动态优化设计研究[J]. 交通运输工程学报, 2018, 18(5): 100-109.
[10] SUZUKI Y, AKUTSU K. Theoretical analysis of flexural vibration of car body[J]. Railway Technical Research Institute, Quarterly Reports, 1990, 31(1): 42-48.
[11] 背户一登. 结构振动控制[M]. 马立新, 李孜, 译. 北京: 机械工业出版社, 2011: 46-48.
[12] 翟婉明. 车辆-轨道耦合动力学[M]. 3版. 北京: 科学出版社, 2007: 122-124.
[13] Guidelines For Evaluating Passenger Comfort In Relation To Vibration In Railway Vehicles: UIC 513[S]. Paris: International Union of Railways, 1994.
[14] 樊新海, 赵智勇, 安钢, 等. 机械振动烈度的频域算法研究[J]. 装甲兵工程学院学报, 2008, 22(1): 42-45.
[15] Technical Committee CEN/TC 256 "Railway Applications" (Secretariat: DIN Germany). Railway applications - Ride comfort for passengers - Measurement and evaluation: EN 12299:2009[S]. Brussels: European Committee for Standardization.

相似文献/References:

[1]张卫华.高速列车耦合大系统动力学创新研究体系[J].机车电传动,2015,(04):1.[doi:10.13890/j.issn.1000-128x.2015.04.001]
 ZHANG Weihua.Study on Innovation System of Coupling Relations Dynamics in High-speed Trains[J].Electric Drive for Locomotives,2015,(04):1.[doi:10.13890/j.issn.1000-128x.2015.04.001]
[2]王广明,范乐天,魏庆龙,等.基于焊缝疲劳寿命分析的高速列车裙板结构设计[J].机车电传动,2015,(05):46.[doi:10.13890/j.issn.1000-128x.2015.05.013]
 WANG Guangming,FAN Letian,WEI Qinglong,et al.EMUs Apron Board Structural Design Based on Weld Fatigue Life Analysis[J].Electric Drive for Locomotives,2015,(04):46.[doi:10.13890/j.issn.1000-128x.2015.05.013]
[3]王华,崔利通.高速列车传动系统机电耦合仿真与分析[J].机车电传动,2015,(02):31.[doi:10.13890/j.issn.1000-128x.2015.02.009]
 WANG Hua,CUI Litong.Simulation and Analysis of Electromechanical Integration for Drive System in High-speed Trains[J].Electric Drive for Locomotives,2015,(04):31.[doi:10.13890/j.issn.1000-128x.2015.02.009]
[4]崔涛,王 琰,吴会超,等.高速列车悬挂参数全局优化方法[J].机车电传动,2015,(01):15.[doi:10.13890/j.issn.1000-128x.2015.01.004]
 CUI Tao,WANG Yan,WU Huichao,et al.Global Optimization of Suspension Parameters for High-speed Train[J].Electric Drive for Locomotives,2015,(04):15.[doi:10.13890/j.issn.1000-128x.2015.01.004]
[5]秦勇,林 帅,李宛瞳,等.高速列车系统安全可靠性分析评估方法研究[J].机车电传动,2016,(01):6.[doi:10.13890/j.issn.1000-128x.2016.01.002]
 QIN Yong,LIN Shuai,LI Wantong,et al.Research on Safety Reliability Analysis and Evaluation Methodof High-speed Train System[J].Electric Drive for Locomotives,2016,(04):6.[doi:10.13890/j.issn.1000-128x.2016.01.002]
[6]杨卫峰,冯江华,易伟民.高速列车网络控制系统安全性设计[J].机车电传动,2014,(03):14.[doi:10.13890/j.issn.1000-128x.2014.03.003]
 YANG Wei-feng,FENG Jiang-hua,YI Wei-min.Safety Design of Network Control System in High-speed Train[J].Electric Drive for Locomotives,2014,(04):14.[doi:10.13890/j.issn.1000-128x.2014.03.003]
[7]冯万盛,程畅,程海涛,等.高速车变压器用橡胶减振器研究[J].机车电传动,2014,(01):44.[doi:10.13890/j.issn.1000-128x.2014.01.010]
 FENG Wan-sheng,CHENG Chang,CHENG Hai-tao,et al.Research of Transformer Rubber Damper for High-speed Train[J].Electric Drive for Locomotives,2014,(04):44.[doi:10.13890/j.issn.1000-128x.2014.01.010]
[8]黄彩虹,等.高速车辆车体低频横向晃动的影响因素研究[J].机车电传动,2014,(01):16.[doi:10.13890/j.issn.1000-128x.2014.01.003]
 HUANG Cai-hong,LIANG Shu-lin,et al.Study on Influence Factors of Low-frequency CarbodySwaying for High-speed Vehicles[J].Electric Drive for Locomotives,2014,(04):16.[doi:10.13890/j.issn.1000-128x.2014.01.003]
[9]张志新,田爱琴,车全伟,等.高速列车车体端部吸能结构研究[J].机车电传动,2013,(01):43.[doi:10.13890/j.issn.1000-128x.2013.01.027]
 ZHANG Zhi-xin,TIAN Ai-qing,et al.Research on Energy-absorbing Structures for Two Endsof High-speed Train Car Body[J].Electric Drive for Locomotives,2013,(04):43.[doi:10.13890/j.issn.1000-128x.2013.01.027]
[10]原佳亮,林飞,方晓春,等.高速列车三电平牵引逆变器多模式PWM调制方法研究[J].机车电传动,2013,(06):20.
 YUAN Jia-liang,LIN Fei,FANG Xiao-chun,et al.Multi-mode PWM Method for Three-level Inverter of High Speed Train[J].Electric Drive for Locomotives,2013,(04):20.
[11]陈 杰,孙维光,郑 伟,等. 高速列车几种车下设备悬挂参数设计方法对比分析[J].机车电传动,2020,(04):1.[doi:10.13890/j.issn.1000-128x.2020.04.112]
 CHEN Jie,SUN Weiguang,ZHENG Wei,et al. Comparison and Analysis of Several Design Methods for Suspension Parameters of Undercar Equipment in High-speed Trains[J].Electric Drive for Locomotives,2020,(04):1.[doi:10.13890/j.issn.1000-128x.2020.04.112]

备注/Memo

备注/Memo:
作者简介:陈 杰(1993—),男,硕士研究生,研究方向为轨道车辆系统动力学。
更新日期/Last Update: 2020-07-10